I spent last Summer vaguely lusting after the gravity-defying cake stands which popped up in every style magazine and chic home store (Anthropolgie does this kind of thing beautifully). I convinced myself that it was exactly the kind of thing I could knock up at home on a wet Sunday, using thriftily purchased remnants of china from the charity store, to eventual gasps of awe from anyone who came to tea.
In the event it’s taken me about 6 months to acquire enough cups and saucers, within my self-imposed budget of no more than a couple of pounds for each, not least because I eventually opted for white porcelain pieces… somehow there’s a fine line between uber-stylish retro chintz and just full on mis-matched, chipped 70′s china, and I definitely kept finding the latter. Colourful egg-cups from Pip Studio provided a little burst of zingy colour in the otherwise-white ensemble.
So here it is, the finished result, albeit with a distinct cake deficit in this shot; we are still recovering from the cupcake frenzy of last week, so it may be some time before I can picture this properly laden with sugary delights. n.b. For anyone who is similarly inspired and reaching for the hot glue, there’s a definite knack to cobbling one of these together; my ‘how to’ notes are below…
Materials and methods:
- 3 or 4 plates of differing sizes; I used a saucer, side plate, dinner plate and an optional under plate to rest it on
- Selection of cups, mugs or egg cups all with flat rims – pile them up before glueing to check for wobble; they should sit happily and steadily before you attach them
- Epoxy resin
To make:
- Compose your cake stand and try a number of different combinations. Decide which direction you want any handles to point in, and ensure you have enough height to layer cakes or biscuits on each tier. Step back and look at it from different angles before making your final decision.
- Clean each piece thoroughly and ensure they are fully dry. Rub a little fine sandpaper over the base and rim of each piece you will be glueing, to increase the hold.
- Mix the epoxy resin together and apply to each piece in turn, working from the bottom and allowing each piece to set before adding the next layer. Take great care to centre each piece, both aesthetically and to minimise the risk of any wobble
- Allow to dry fully, then test each join by pulling gently – the last thing your grand hostess-y entrance needs is to be marred by the sudden loss of the bottom tier of your cake stand at the moment critique….
- I used a spray of orchid in the egg cup at the top, but depending on the occasion might also use easter eggs, coloured hat pins, berried twigs etc – or for a true Madhatter touch, twisted and bent cake forks and spoons (but there’s a whole other load of trips to the charity shop before I manage to acquire those).
