Today the house is once again filled with swirling brick dust as our renovations continue, though it is eerily silent as the builders seem to have downed tools in search of sunshine, and have not been seen since Thursday. I’ve been forbidden from stepping in to finish the job, glue gun and apron in hand, so instead have turned my restless energies into creating…. a rocket!
Harry’s current passion is rockets and outer space, having discovered Wallace and Gromit and their adventures to the moon in search of cheese. With the challenge of only using items already around the house, I built this in a couple of hours and it has already been piloted on several missions (‘Let’s go whooshing Mummy! Put your seatbelt on and I will press the button!’). Making the rocket capsule was easy enough – I used an opened-out packing box from our recent move – but the domed roof gave me pause for thought. In the end, I used a fibre matting liner intended for the hanging baskets I never quite got around to planting this summer. Sprayed silver and with empty yoghurt pots glued on top it does the job just fine…
I cut out the viewing window by drawing round a plate and then using a craft knife. A polystyrene wreath ring makes a good porthole, especially when wrapped in scraps of brightly coloured paper. Cotton reels give a countdown to launch, and also provide the basis for an external control panel (below; I added one inside too for proper piloting of the craft after take-off…).
On the side of the rocket is this fuel cap and general gadget bar, made from old plastic lids and some stick-on alphabet letters
The captain needs a proper entrance, of course… Reels provide doorknobs on both sides, for pilot access and to firmly shut the door once inside, in case of aliens (or grown-ups). See how to make 3D stars like these here.
And finally our accessories; a spaceman lunch box (for cheese sandwiches and milk; the food of champions), a range of plastic tools in case of spacecraft malfunction – always possible when Mummy is the architect – and space goggles; this cardboard pair of 3D specs I saved from an old comic.
If you fancy making one of these yourself, come fly with us! Here’s a full list of what we used, though the beauty of these is there’s no ‘right’ way of doing it – use whatever you have to hand. A word on technique; I found that hot glue (from a glue gun) is the best way of ensuring everything stays in place, and craft knives – rather than scissors – are best for cutting corrugated cardboard like this without squashing and tearing it. Toys like this will take a battering if used to their fullest potential, so I’m armed with a big role of clear packing tape to add reinforcement and repairs when needed.
Like this project? If you’re a cardboard recycling fan, you might also like our cardboard train and our cardboard shop. And now you’ll have to excuse us; we need to prepare for a moon landing in 5… 4 … 3… 2….